GET IN TOUCH
Product img

Guardhat Analytics:
Real Time and Batch Analytics

GET IN TOUCH

Guardhat’s Kyra and SCC software comes with an embedded analytics engine, that is comprehensive and capable of both real-time and batch analytics, and provides a set of pre-built dashboards and configurable reports out of the box for Safety Compliance KPIs and Benchmarking, incident and safety analytics, geospatial/map based visualization of localized information, walk-paths and inspection plan adherence, heat maps for composite sensory measurements, visual contact-tracing for COVID-19 social-distancing and much more.

The system also provides an optional Data Sciences platform for additional analytical processing (including the possibility of Machine-learning and advanced, distributed batch/streaming data-processing), and has integration connectors for both sourcing external data into the engine, and sending bulk data to downstream data warehouses and data-lakes for enterprise-wide actionable information analysis.

Guardhat delivers various analyses, metrics, and reports to provide value to our customers and partners. They can be grouped into four five major purposes:

Build Img

Safety Compliance
& Reporting

Build Img

Claims & Incident
Analytics

Build Img

Productivity

Build Img

Scorecards, Dashboards
& Reporting Out

Build Img

Benchmarking

1. Safety Compliance

Guardhat provides regular reports to customers on performance against safety standards. Here are some examples of compliance reports across each major area we measure:

  • Environmental Safety
    • Response time to gas, temperature, radiation, particulate warnings
    • Time of response presented as a distribution, marking min (fastest response), max (slowest response), and median
    • Distribution of staff still in the warning zone by minute after a call to evacuate has been issued (absolute value and percentages)
    • Monitor data point to ensure environmental compliance e.g. to maintain permits
  • Fire warning
    • Same statistics as above, but given the importance of fire responsiveness, it should be a separate metric.
  • Heat map of gas levels, temperature and other environmental measures/levels across facility, over time.
  • Locational Safety
    • Number of violations and compliant entrance of Lock Out / Tag Out zones.
    • Absolute number of violations and compliant entrances.
    • Ratio of violations to compliant entrances (to serve as a score).
    • Violator histogram to see if specific people are driving violation activity.
    • Heat map of violation activity to identify if particular zones are more problematic than others
  • Geofencing violations
    • Same statistics as above, but reported separately as Lock Out / Tag Out is a specific issue that needs to be called out specifically.
  • MIA
    • Number of MIA events in a time period.
    • Percent of time MIA over total time Guardhat environment is active (e.g. sum of all MIA events is 20 hours over a 100 hour period, or 20% MIA).
    • Heat map of MIA events (to help identify potential wireless dead zones or unauthorized exit points for staff).
    • MIA histogram by user to see if specific people are driving MIA activity
  • Moving equipment
    • Proximity to hazardous equipment indicating high risk areas in the plant.
  • Wearer Safety
    • Contract tracing report allowing identification of persons who have been in contact with a person of interest to prevent / detect virus spread.
    • Reports of warnings across all biometric data we are collecting (e.g. temperature, heart rate).
    • Number of warning events in a time period, with drill down by type (e.g. heart rate vs temp).
    • Heat map of biometric warning events, with drill down by type (to help identify potential problem areas where bodies are under greater stress).
    • Biometric warning histogram by user with drill down by type to see if specific people may benefit from wellness intervention, are overworked, etc. (i.e. some health-based intervention or decision may be beneficial)
  • Guardhat Not Worn violations
    • Number of Not Worn events in a time period.
    • Percent of time Not Worn over total time Guardhat environment is active.
    • Heat map of Not Worn events.
    • Not worn histogram by user to see if specific people are driving MIA activity.
  • Violation of any other wearer-specific item we are tracking (e.g. chin strap, presence of RFID tagged additional safety equipment)
  • Follow “Guardhat Not Worn” metrics above
  • SOS activity
    • Number of emergency situations identified by user.
  • Individual workers reports highlighting safety history/compliance violations/issues over time which could be integrated into employee appraisals (for the specific worker, or across direct reports of a supervisor/manager).
  • Prescriptive guidance on the need to mitigate worker risks such heat exhaustion, cold exposure, etc. given regulatory standards (e.g. rest time per time exposed to heat over a threshold).
about_mission
about_mission

2. Claims & Incident Analytics

Working with our insurance partners, we can define specific reports to help with claims adjudication, fraud detection, and risk pricing enhancement. This is comprised of the following components:

  • Pre-Event: relevant data to fully understand the circumstances leading to a claim from both the Guardhat of the injured party or parties, and any Guardhat hard hats proximal to the injured party/parties.
  • Event: specific data relevant to the claim, as well as any ancillary data captured which may expose factors not anticipated to be impactful to claims adjustment and fraud detection (e.g., gas levels leading to balance issues for a wearer who fell and was injured); data should be presented for both the injured party/parties and any proximal Guardhat wearers.
  • Post-Event: data after the key event will help clarify response / mitigation / containment steps taken, time between injury and help/resolution, etc.; as with Pre-Event and Event data, we will need to present data for both those directly involved and any proximal Guardhat wearers.
  • Fraud: it is unlikely that additional data would be needed for cases of fraud, but we should work with insurer SIU (Special Investigative Unit) teams to potentially develop fraud-detecting logic processing within the helmet itself or in the SCC to help proactively identify potential red flag claims.

3. Productivity

Additional value to customers is derived from the Guardhat system’s ability to track user movements, activity, idle time, etc.

  • Heat map of user movement with ability to drill down to specific wearers, roles, shifts over a defined time period.
  • Animated map of user movement with ability to drill down to specific wearers, roles, shifts over a defined time period.
  • Heat map of idle time with ability to drill down to specific wearers, roles, shifts over a defined time period.
  • Heat map of user concentration with ability to drill down to specific wearers, roles, shifts over a defined time period.
  • Re-presentation of geofencing data to identify potentially inefficient movement patterns within the job site.
  • When, where and how help line calls were initiated; provide targeted training for frequently occurring situations
about_mission
about_mission

4. Scorecards, Dashboards & Reporting Out

Given the wide array of data Guardhat collects and the various ways we can present that data, we work with each customer to understand the most critical metrics and construct a dashboard and/or scorecard so the customer has immediate access to the most pertinent, actionable information – in real time. Additionally, we can create automated reports to submit to outside bodies such as regulators or oversight authorities. These can include:

  • CEO dashboard of safety and productivity
  • Staff meeting safety scorecard
  • Plant/mine/refinery/jobsite manager safety dashboard
  • Regulatory reports required by OSHA, EPA, etc.
  • Reports to insurers on safety compliance for premium credits.
  • Safety verification reports to certifying bodies, trade groups, etc.
  • Compliance reports mandated by customers to meet contractual requirements

5. Benchmarking

Guardhat provide customers with regular benchmarking reports to help them understand how they’re stacking up against similar businesses. We offer safety compliance and productivity benchmarking reports to our customers, driven by basic demographic groups across:

  • Geography
  • Industry
  • Location size

Benchmark reports show average score for a given metric for the customer against the distribution of average scores for all customers in the segment being compared against. It should show position in a distribution as well as percentile (or at least decile or quintile). We should avoid rank as it could expose us having a small number of customers in a given segment.

about_mission

Guardhat Provides Customized Solutions To Specific Industries

Team Image

CHEMICAL

Team Image

CONSTRUCTION

Team Image

FORESTRY &
LOGGING

Team Image

MANUFACTURING

Team Image

ENERGY

Team Image

METALS

Team Image

MINERAL MINING

Team Image

PAPER

Team Image

PLASTIC

Team Image

TELECOMMUNICATION

Team Image

UTILTIES

Team Image

WOOD

Planning To Explore Our Products & Solutions?

GET IN TOUCH